No Power Dell 1320c, 1320c

1. Turn the printer off.
2. Wait 10 seconds.
3. Turn the printer on.
4. Determine if the issue still occurs.

Reseat the Power Cord and Verify a Good Power Source

1. Power down the system.
2. Unplug the power cord.
3. Wait approximately 1 minute.
4. Reseat the power cord.
5. Verify that the power cord is plugged directly into a known-good power outlet.

To reset the circuit breaker, perform the following steps:

1. Locate the circuit breaker reset button and test button next to the power cord on the back of the printer
2. Using a pen or other pointed object, press the Test button. (The circuit breaker Reset button pops out.)
3. Press the circuit breaker Reset button until it clicks and is back in place.
Verify the condition of the Ready/Data LED.The Ready/Data LED on the Dell 1320c Personal Color Laser printer is located in the lower left corner of the User-Interface Control PanelThe Ready/Data LED has three states which indicate the following printer conditions:

* Steady Green indicates the printer is ready for normal operation.
* Blinking Green indicates the printer is currently processing or printing or in an error condition. * Steady Amber indicates the printer is on but in power saving mode.